The Dynamic Host Configuration Protocol (DHCP) is a network protocol that functions at the application layer of the Internet Protocol (IP) suite. A server that uses DHCP will be able to dynamically assign IP Addresses and other network configuration parameters to devices on the network; thus, allowing communication to a second network. The protocol can be implemented in networks of any size, ranging from small home area networks (HANs) to large campus area networks (CANs) and even the networks used by Internet Service Providers (ISPs).

TCP/IP, Transmission Control Protocol/Internet Protocol, is the suite of two protocols, TCP and IP, used to interconnect network devices on the Internet. The TCP performs the handshake between the network devices to establish a socket. The socket remains open during the communication. The source TCP converts the data into packets and sends them to the destination TCP. The TCP performs acknowledgment for the successful delivery of the packets. If a packet drops on the way, the source TCP resends the packet. The IP layer is responsible for sending and receiving the data to the correct destination. The TCP/IP stack is comprised of the following layers.

MAC, Media Access Control, address is a globally unique identifier assigned to network devices, and therefore it is often referred to as hardware or physical address. MAC addresses are 6-byte (48-bits) in length, and are written in MM:MM:MM:SS:SS:SS format. The first 3-bytes are the ID number of the manufacturer, which is assigned by an Internet standards body. The second 3-bytes are serial numbers assigned by the manufacturer.

address and the host address. A subnet mask separates the IP address into the network and host addresses (<network><host>). Subnetting further divides the host part of an IP address into a subnet and host address (<network><subnet><host>) if additional subnetwork is needed. Use the Subnet Calculator to retrieve subnetwork information from the IP address and Subnet Mask. It is called a subnet mask because it is used to identify the network address of an IP address by performing a bitwise AND operation on the netmask.